If they've previously been covered in paint, wax or any glossy lacquer, then you will have to clean them more thoroughly. Kitchen cabinets that are lacquer, painted and/or glossy surfaces can be cleaned with Fusion's TSP, which is basically your best friend for removing oil, grease and stains.
Is Fusion paint good for kitchen cabinets?
Leave a reply
Can I paint my kitchen cabinets with Fusion paint?
Fusion™ Mineral Paint is formulated with a built in top coat, so you do not need to add anything over top! A Kitchen can get a ton of wear and tear, Fusion™ has an exceptionally durable coating by using only 100% acrylic, it is water resistant, so any grease, food and dirty finger marks can easily be washed away.
What is the best paint finish for kitchen cabinets?
Semi-gloss: This is the best choice when painting kitchen cabinets. Because it has some sheen, semi-gloss paint will help reflect light and be more durable in the long run, which is important in a kitchen environment.
Does Fusion paint need to be sealed?
Fusion Mineral Paint is a 100% acrylic paint with a built-in topcoat made from 100% resin. This means you do not need to seal it with an additional product to ensure that it is waterproof. … Fusion Mineral Paint is dry to the touch after 2 hours and can accept a re-coat of paint after 2 hours.
Is epoxy paint good for cabinets?
Epoxy's main claim to fame is longevity. It acts like a liquid plastic coating on everything from transistor parts to kitchen cabinets, floors in theaters, shopping malls, garages, hospitals, and factories. The major use of two-part epoxy is to protect surfaces—typically floors— that see high traffic use daily.
Does Fusion mineral paint chip?
Important to note: This oil does not leave a surface film that will chip or scratch. The oil will feel dry to the touch one day after the initial application, however complete drying can be several days. You can paint over hemp oil after it cures in about a week. Pin This For Later!
Do you need primer with Fusion paint?
Fusion is self priming on raw wood, meaning it will adhere to and fill in pores to make a uniform surface ready for a covering a second coat of paint. … Most wood as long as it is clean, doesn't need anything further.
What do pros use to paint cabinets?
We usually use professional-grade lacquer because it has a lovely, silky-smooth feel to it, and is what cabinet manufacturers use. We think it's the best paint for cabinets, hands-down (although there are some great pro-level water-based options as well).